-
31.08.10
Sales >> Forging Presses
Read more...
Description:
2" National Upsetter
-
18.02.10
Sales >> Forging Presses
Read more...
400 ton Ferracute Knuckle Joint Embossing Press Re:23284
$19,500!
Reference #:
23284 Manufacturer:
Ferracute Model:
E-401 Max rated tonnage:
400 tons Stroke:
4" (101.6mm) Shut height:
15" (381mm) Open height:
19" (482.6mm) Bed F-to-B:
20" (508mm) Bed L-to-R:
20" (508mm) Strokes per minute:
33 spm Ram adjustment:
1/2" (12.7mm) Main motor:
40hp - 1,200rpm Net weight:
26,400 lbs (12,000 kgs) 
Press is complete with:
• Air Clutch
• Band Brake
• Hydraulic KO
• Oil Lubrication System
• Gordon Brake Monitor
• Press Guarding
Very well maintained, this press is available for immediate inspection and delivery.
250 ton Bliss 23B Knuckle Joint
Coining & Embossing Press Re:23282$17,500!
Reference #:
23282 Manufacturer:
Bliss Model:
23B Rated tonnage capacity:
250 tons Strokes per minute:
45 spm Shut height:
13-1/2" (343mm) Die post:
2" (51mm) Bed F-to-B:
24" (610mm) Bed L-to-R:
32" (813mm) Ram adjustment:
1/2" (12.7mm) 
Press features as follows:
Back Geared
Air Clutch and Brake
Lube System
Motorized Ram Adjustment,
Air Clutch, Rotary Limit Switch, Lube System
Cast Meehanite Frame
Very well maintained, this press is available for immediate inspection and delivery.
150 ton Ferracute Long Stroke
Knuckle Joint Embossing Press Re:23283$7,500
Reference #:
23283 Manufacturer:
Ferracute Model:
EG-151 Max rated tonnage:
150 tons Stroke:
3-1/2" (88.9mm) Open height:
15-3/4" (400mm) Shut height:
12-1/4" (311mm) Bed F-to-B:
15" (381mm) Bed L-to-R:
16" (406mm) Strokes per minute:
100 spm Ram F-to-B:
9" (229mm) Ram L-to-R:
12" (305mm) Main motor:
7-1/2hp - 1,800rpm 
Press is complete with:
Helm Load Guard Impact Monitor
Gordon Brake Monitor
2-Hand Controls
Air Clutch
Hydraulic KO
Oil Lubrication System
Very well maintained, this press is available for immediate inspection and delivery.
-
05.02.10
Sales >> Forging Presses
Read more...
Asset Number:
P148
Description:
2000T National Maxi
SH:
39"
Stroke:
14"
Ram:
44" x 42"
Bed/Die:
48" x 52"
SPM:
60
ADJ:
3/8"
Weight:
Approx 308,000#
-
26.01.10
Sales >> Stamping Presses
Read more...
Asset Number:
P183
Description:
45T Minster
SH:
11"
Stroke:
4"
Ram:
18" x 8.5"
Bed/Die:
28" x 18"
SPM:
55
ADJ:
Weight:
-
20.01.10
Sales >> Forging Presses
Read more...
Asset Number:
P173
Description:
1000T Ajax
SH:
21.5
Stroke:
8"
Ram:
27.5" x 26"
Bed/Die:
29" x 36"
SPM:
75
ADJ:
1-5/8"
Weight:
Prox 107,000# lbs.
-
20.01.10
Sales >> Forging Presses
Read more...
Asset Number:
P136
Description:
1300T National
SH:
25"
Stroke:
8"
Ram:
20" x 28"
SPM:
100
-
20.01.10
Sales >> Forging Presses
Read more...
Asset Number:
P203
Description:
1600T National
SH:
30"
Stroke:
11"
Ram:
36" x 36"
Bed/Die:
41.5" x 47"
SPM:
70
Weight:
Approx 195,000#
-
20.01.10
Sales >> Forging Presses
Read more...
Asset Number:
P197
Description:
No. 3 Special (22 1/2") Ajax Billet Roll
Bed/Die:
22.5" die diameter
Weight:
Approx 38,660# lbs.
-
20.01.10
Sales >> Forging Presses
Read more...
Asset Number:
P208
Description:
No. 3 Special (22 1/2") Ajax Billet Roll
Bed/Die:
22.5" die diameter
Weight:
Approx 38,660# lbs.
-
20.01.10
Sales >> Forging Presses
Read more...
1300T National Forging Press
Shaft Diameter at Journals: 15"
Shaft Diameter at Eccentric: 25 1/4"
Shut Height: 25"
Strokes per Minute: 80
Stroke: 10"
Diameter of Tie Rods: 8"
Width Between Columns: 36"
Motor H.P. 75
Weight: 130,000 lbs.
Die Seat:
Front to Back: 41"
Right to Left: 35"Ram Face:
Front to Back: 31"
Right to Left: 31"Floor Space:
Front to Back: 9' 8"
Right to Left: 10' 4"Height Above Floor: 13' 4"
Short Clip of a Large Bull Gear being machined on our largest vertical lathe.
|
